Stainless Steel DIN PN40 Festo Actuator Ball Valves

Our ball valve options feature upstream and cavity relief bores in the ball, along with a high-temperature spindle extension for insulation and steam actuation. With our experienced team, we deliver premium-quality products promptly and affordably. Whether for food production or cutting-edge medical research, our Festo DFPD Series Quarter Turn Actuator, blending German engineering with cost-effectiveness, offers adaptable pneumatic valve solutions.

Key Features

Key features and benefits of BV-L6N00FE Actuated Ball Valves.
1

Key Features

Experience the exceptional capabilities of the DFPD Series by Festo, where you will discover meticulously customised standard solutions impeccably aligned with your unique specifications. Whether your needs entail singular, limited production runs or large-scale, high-volume manufacturing, rest assured that we shall discern the optimal remedy for your project, spanning from the inception of the planning phase to the ultimate stages of assembly and commissioning.
2

Key Features

The Festo Pneumatic Actuator stands as an exemplar of compactness and weightlessness among the pneumatic actuators available in the contemporary market. Its creation was meticulously orchestrated to not only meet, but to exceed the demands for control, safety, and energy efficiency across a broad spectrum of applications.
3

Key Features

All our Actuated Valve Assemblies are meticulously crafted in-house with the invaluable assistance of automation experts. Each finished unit arrives fully equipped to exceed exacting standards and is accompanied by a comprehensive two-page test report delineating precise opening and closing times.

High Pressure PN40 Technical Stuff

B C D E B C D E
SR SR SR SR DA DA DA DA
1/2" 77.77 148.00 145.70 115.00 77.70 148.00 133.30 115.00
3/4" 77.77 153.00 145.70 120.00 77.70 153.00 133.30 120.00
1" 77.77 159.00 145.70 125.00 77.70 159.00 133.30 125.00
1 1/4" 89.70 183.00 170.40 130.00 77.70 171.00 133.30 130.00
1 1/2" 89.70 188.00 170.40 140.00 89.70 188.00 151.40 140.00
2" 108.00 215.00 223.10 150.00 89.70 197.00 151.40 150.00
2 1/2" 123.70 245.00 252.30 170.00 108.00 232.00 189.30 170.00
3" 133.40 271.00 270.90 180.00 123.80 260.00 213.70 180.00
4" 154.00 320.00 301.40 190.00 133.40 294.00 270.90 190.00
5" 154.00 363.00 301.40 325.00 133.40 337.00 270.90 325.00
6" 201.50 436.70 428.20 350.00 182.30 418.00 374.20 350.00
8" 225.50 528.70 519.30 400.00 201.50 485.70 428.20 400.00

High Pressure PN40 3D Stuff

Actuated Valve Testing & Calibration

All actuated valve assemblies are fully tested and calibrated in house prior to packing and shipping from our expert team of technical engineers. This means that when they arrive at site, you're immediately ready to install and get your production back up and running.

Valve Standards & Stuff

Body Material: ASTM A351 CF8M 316 Stainless Steel & Trim
Seats Material: TFM 1600 PTFE Ball Seats
Body Seal Material: Grafoil/316 Stainless Steel
Stem Packing Material: Grafoil
Design Standard: DIN3357 1,2,EN 12516-1
Wall Thickness: ASME B16.34, EN12516-1
Inspection & Testing: DIN3230/3, EN 12266
Face 2 Face: DIN 3202 F4 (1/2" - 4") & DIN 3202 F5 (5" - 6")

FAQs

This valve is appropriate for use with drinking water, provided it falls within the specified pressure and temperature constraints.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur scelerisque tincidunt egestas. Donec tempor, lorem eu aliquet imperdiet, nisi tellus imperdiet erat, et ullamcorper nibh diam at orci. Integer placerat arcu pretium, condimentum ante et.

Certainly, our actuated valves are provided with comprehensive operations and maintenance manuals. These manuals are furnished by both the valve and actuator manufacturers.

Yes! Position feedback is provided as a standard feature with switches for both open and closed positions.
Potentially. Contact us so we can discuss potential options.
No unfortunately. We do not offer that level of customisation.
Most definitely. We will require some more information. Drop us an email or get in touch on the blower.
Yes we can. Plane label or with a big bow. Send us a copy of your delivery note and we will fix it to the box. Jop done.
We will need to talk to Big Tony. If he says you're good for the debt then everything is in order. You can apply for this on the product page or ask for Big Tony when you get in touch.
Yes it is. In theory you would need to purchase the valves in quantities of two and we can then re-assemble and pressure test prior to shipping.

Need More Dimensions?

If you lack advanced software or your technical skills are not up to par, don't worry. We provide a comprehensive technical drawing service for our automated valves. Our skilled artists are prepared to create the drawings you require. Just let us know your specifications.

4-20mA Control Available On This Product

The BLX V100E Series is an Electro-Pneumatic control unit that allows the Actuator to incrementally adjust the Valve's position between the fully open and closed cycle. Product variants are available for spring return and double acting setups with feedback and safety settings. Ask our team today about how the V100E can help with your process requirements.

Festo DFPD Actuator Videos

Request more information or Advice

Please feel free to request information and advice using the form below or call us on 0151 547 1221

Stainless Steel DIN PN40 Festo Actuated Ball Valves